Motor graders 180HP 190HP for sale

Model Number: GR180 Key Specifications/Special Features: Motor Graders are mainly used in ground leveling, canalling, slope scraping, earthmoving, scarification or snow removal work on road, airfield, farmland, and so on. They are necessary construction machines for national defense engineering, mine construction, town and country roads building, and farmland improvement..Performance and characteristicNew appearance design.The articulation frame is adopted and matched with the steering of the front wheel, with small turning radius, maneuvering and flexible.The electro-hydraulic controls the power shift gearbox, with 6ahead gears and 3 back gears.The international matching hydraulic parts are adopted, with reliable operation.The motions of the blade are fully hydraulically controlled.The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential mechanism.The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable, with convenient application, and the comfort of driving is improved.The cab is grand and nice, with wide eyeshot and good sealing.The front bulldozing plate, rear scarification device, front scarification harrow and automatic leveling device can be added. Basic specification Engine model CUMMINS CTAA8.3 Rated power/speed 138kW/2200 Dimension(LxWxH) 8900×2625×3470mm Operating weight(Standard) 15400kg Performance specification Travelling speed ,forward 5,8,11,19,23,38 km/h Travelling speed ,reverse 5,11,23 km/h Tractive force(f=0.75) 84KN Max. gradeability 20% Tire inflation pressure 260 kPa Working hydraulic pressure 16 MPa Transmission pressure 1.3~1.8MPa Operating specification Max. steering angle of front wheels ±50° Max. lean angle of front wheels ±17° Max. oscillation angle of front axle ±15° Max. oscillation angle of balance box 15 Frame articulation angle ±27° Min. turning radius using articulation 7.3m Blade Maximum lift above ground 450mm Maximum depth of cutting 500mm Maximum blade position angle 90° Blade cutting angle 28°—70° Circle reversing rotation 360° Moldboard width X height 3965×610mm